UAE PS150A 455m3/hr 3bar 415V 60Hz Jacked Up Barge Salt Water
Electric Submersible Pump
UAE drilling company were looking for an electric submersible pump
that can push 455m3. The submersible pump will be used on our jack
up barge which may be jacked up to a maximum of 30 meters. Medium
will be salt water. They will look at launching the submersible
pump with a davit that can slew overboard. Water Temperature can
reach up to 40 degrees Celsius during the summer time.
K Class Submersible Pump:
1. Voltage and frequency = 415V, 50HZ
Required cable length = 50 Meters
Required pressure on deck = 455m3
Vertical distance between deck and seawater level during pump
operation. = max 30 meters
S Class Submersible Pump:
1. Voltage and frequency = 440V, or 690V @60HZ
Required cable length = 50 Meters
Required pressure on deck = 455m3 7600L/pm
Vertical distance between deck and seawater level during pump
operation. = max 30 meters
All details had been approved, we chose one suitable submersible
pump and sent a formal quotation.
| Model | 550QJH500-140-320kw |
| Flow rate | 500m3/hr |
| Head meters | 14 bar |
| Motor power | 320kw |
| Power supply | 3phase/415V/60Hz |
| Pump dia | 240mm |
| Out let dia | 200mm |
| Pump material | SS316 |
| Check valve | SS316 |
Fire monitor | 3316 Stainless Steel construction; Flow Rate: 9000 LPM (Automatic
Nozzle); Jetting Pattern: Straight stream,Fog; 360° rotation
horizontally; -90° to +90° elevate vertically; Flange standard:
BS4504,ANSI150,GB,. Working pressure:10bar, max reach:105m |
Kindly note:
2. It's 50m submersible power cable.
3. The material of the quoted fire monitor with SS316 material as
well.
4. The flow rate of PS150A is 9000L/min (540m3/per). We have
confirmed with the engineer, the flow rate of the pump can be a bit
lower than this. So we suggested pump with 500m3/hr.
Notice:
1. It’s better to match control panel in order to protect the pumps
2. After shut down the power, should wait for more than 3mins when
restart the pump
3. When the pump finish work, it’s better to cut off the power
ABS Class approval as below:
Why choose us?
1. Specialized production Manufacturer for Submersible Pump
2. Focus on technological innovation, Over Industry leading level
3. Good experience at Domestic and oversea market
4. Carefully paint for Good appearance
5. Years of International service standards, Engineer one-to-one
service
6. CE; ISO; ABS
FAQ
Q:How long is warranty?
A:About 24 months.
Q:How long is production lead time?
A:Depends on quantity, the normal small amount production is about
10-25 days.
Q:What’s type of shipping?
A:Usually by sea, and will be based on the customer's destination
to choose the most favorable most appropriate way
Q:What is the shipping terms you can provide?
A:Depends on customer's requirements, we can provide different
transportation terms,
such as EXW, FOB, CIF.
Q:How can I pay for my items? What is the payment you can provide?
A:Usually by T/T, 50% down payment once PI confirmed, the balance
will be paid after inspection and before shipment. L/C at sight.
