20 l/s 220m 10 Inch Casing Water Underground Submersible Pump Specifications With Star-delta Control Panel

Underground submersible pump model:

1. Type: 200QJH72-177-63

2. Pump diameter: 8 inch

3. Outlet diameter: 4"

4. Flow: 20l/s or 72m3/h

5. Head meters: 177m

6. Power supply: 63kw 85hp, 121.5A, 3phase 400v 50hz

7. Material: AISI 304

20l/s underground water submersible pump technical specifications:

1. Pump body

The pump body shall be cast in zinc-free bronze, stainless steel/AISI 316 or cast iron. The body shall be capable to withstand a hydraulic pressure, equal at least to one and a half (1.5) times the shut-off head.

2. Impellers

The impellers shall be cast in high-grade zinc-free bronze or stainless steel. In case of impellers of enclosed type, the bowls shall be equipped with wear rings of renewable type, made of zinc-free bronze and having larger bearing surface, AISI 316 or Thermoplastic Resign armored with Stainless Steel.

3. Shaft

The pump shaft shall be of stainless steel with journals sleeved with renewable, hardened stainless steel sleeves/AISI 420.

4. Bolt and Nuts

All bolts, nuts, studs, washers, etc. shall be manufactured in stainless steel.

The pump shall be fitted with removable shaft bearing sleeves, bearing bushes, casing wear rings and impeller wear rings. Each impeller shall be located on the shaft by identifiable distance sleeves or similar, such that re-assembly of the rotating element can be carried out without the necessity of accurate measurement. The rotating assembly shall be statically and dynamically balanced after which each part of the assembly shall be identified and marked to ensure identical re-assembly after maintenance.

5. Diffuser

Diffuser is made Thermoplastic resin

6. Bearing

Bearings shall be water lubricated and where rubber type bearings are used the bearing material shall be securely bonded to a metal housing. Rubber bearings shall only be used where there is sufficient pressure difference through the bearing to afford adequate lubrication and cooling of the bearing.

7. Stage Casing

Stage Casing is made from AISI 316

8. Motor

The submersible motor shall be of the completely enclosed type for continuous duty under water operation on 400 V 50 Hz, 3 phases AC. Motor performance shall be in accordance with the relevant section of BS 5000:Part 99. The electric motor is Rewindable. Motor Casing is AISI 316

100% of pump units are factory-tested

Control board

The starting System is Star Delta. There is at least three (3) thermostat for winding over temperature protection.

Control panel (to include not limited to):-

1. AC voltmeter

2. AC ammeter

3. Selection switch for both voltage and current

4. Frequency meter

5. Main switch

6. Circuit breaker

7. Voltage regulator

8. Source lamp and water level sensor

75kw control system star-Delta,please there is PE100 thermistor is incorporated.

Feature: start and stop the pump, protect the pump if overload, dry run, phase loos or short circult, with PT100 thermistor.

Power Cable

Flat 600/1000 volt grade and consist of conductors of high conductivity tinned copper wire, EPR insulated and with super tough rubber sheath.

Round Control cable

    Zhengzhou Shenlong Pump Industry CO.,Ltd, a professional reputable ODM OEM water pump manufacturer in China since 1996, recognized by CE and ISO, ABS, SGS, BV.

  Main products: Electric Submersible Pump for pumping clean water, hot water and sea water with bronze, SS304, SS316, SS316L, Dupex stainless/SS904L; Mine Submersible Pump/Submersible Motor/Sewage Submersible Pump/Slurry Submersible Pump/Fountain Submersible Pump/Axail Flow Submersible Pump/Surface Centrifugal Water Pump. Related business: kinds of water pipes, cables, control panels, inverter and other pump spare parts.

   Over 70 countries’ customers are enjoying our pumps and service. Our pumps are widely used in fields, such as seawater aquaculture & desalination, offshore, jack-up, floating dock, shipyard, irrigation, wastewater treatment, fountain projects. We are seeking for local water pump service business and dealer who is professional in water pumps. Welcome to join us.

    Zhengzhou Shenlong Pump Industry CO.,Ltd has three complete casting lines, including Expendable casting process, wax casting mold, coated sand, it can meets the different requirements on the dimensional accuracy of casting. The wax casting mold line, special for stainless steel material, was finished in the thermostatic workshop to guarantee the casting accuracy, meanwhile, shorten the whole production time.

  More than 85 sets production machine, includes grinding machine, CNC, lathe, Milling, High speed punch press machine, testing machine, etc., with sufficient spare parts stock to guarantee the production capacity 11,000 sets per month. From material purchase, metalworking, impeller dynamic balance, motor winding, insulation and pump assembling, passed more than 27 inspection processes, to ensure the quality meet a criterion.