QSZ submersible axial flow pump parameters:
1. Flow: 1800m3/h axial flow water submersible pump
2. Head: 5.4m 6m 8m 10m axial flow water submersible pump
3. Outlet diameter: 200mm 250mm 300mm 350mm
4. Temperature: 0-40℃
QSZ submersible axial flow pump applications:
1. Farmland irrigation, spray irrigation
2. Water supply for industrial or residential buildings, water
distribution in mountain areas
3. Low-lying areas and dunes
4. Water supply and drainage for mines in urban or rural districts
5. Drain water system
6. Flood protection and drainage
7. Sewage water treatment
8. Water treatment in pump stations
QSZ submersible axial flow pump overview:
Axial flow water submersible pump models:
| Discharge Dia | Model | Flow range | Head range | Power |
| mm | QSZ type | m3/h | m | kw |
| 200 | QSZ300-6-10 | 300 | 6 | 10 |
| 250 | QSZ500-5-13 | 500 | 5 | 13 |
| 350 | QSZ800-3-13 | 800 | 3 | 13 |
| 400 | QSZ1000-3-18.5 | 1000 | 3 | 18.5 |
| 350 | QSZ1100-10-45 | 1100 | 10 | 45 |
| 500 | QSZ1500-4-22 | 1500 | 4 | 22 |
| 500 | QSZ1250-5-30 | 1250 | 5 | 30 |
| 550 | QSZ1600-4-30 | 600 | 4 | 30 |
| 550 | QSZ2100-3-30 | 2100 | 3 | 30 |
| 550 | QSZ1600-5-37 | 1600 | 5 | 37 |
| 550 | QSZ2000-4-37 | 2000 | 4 | 37 |
| 650 | QSZ2500-3-37 | 2500 | 3 | 37 |
| 550 | QSZ1900-5-45 | 1900 | 5 | 45 |
| 650 | QSZ2400-4-45 | 2400 | 4 | 45 |
| 750 | QSZ3000-3-45 | 3000 | 3 | 45 |
| 500 | QSZ1800-10-75 | 1800 | 10 | 75 |
QSZ submersible axial flow pump features:
Axial/ Mixed Flow Submersible Pump various installation
methods–horizontal, vertical, tilting.
Big flow, non-clogging, fluids flowing easily
Pump and motor share the same shaft,improving rotor concentricity,
less damage to shaft when pump working.
The impeller angle is adjustable, highly improve the flow adjusted
range.
The motor is sealed three times, ensuring that there is no water
leakage.
QSZ submersible axial flow pump working conditions:
1. Three-phase power source, voltage 380V (deviation no more than
5%), frequency 50Hz (deviation no more than 1%).
2. Pump motor must be filled with clear water.
3. The temperature of the water being pumped shall not be more than
40°C.
4. PH value of the water being pumped shall be 5.5~8.5
